One Platform. Endless Ways to Use the Water.

With a standard 12V or mains-powered electric pump, our 375 inflates in about 4 minutes, and the larger 800 takes around 7–8 minutes. Two crew can deploy and secure a multi-module setup off the stern in under 15 minutes. Deflating and packing back into the storage bag takes roughly the same amount of time.

The platform is constructed from high-density double-wall drop-stitch fabric (DWF) with heat-welded seams — the same technology used in commercial-grade military and rescue inflatables. This gives the deck a rigid, board-like feel when inflated (working pressure 10–15 PSI), with no flex or "bouncing" underfoot.

The top surface is finished with anti-slip EVA decking that resists UV, saltwater, and fuel exposure. With proper care, expect a service life of 5–8 years of regular use, even in tropical marine environments.

As a general guide:

• 375 (3.75 m²) — Sailboats and cruisers 30–46ft
• 525 (5.25 m²) — Cruisers and small motor yachts 40–55ft
• 675 (6.75 m²) — Motor yachts 39–60ft, or as a module in multi-platform setups
• 800 (8 m²) — Larger yachts, or as wing modules for superyachts 30m+

If you're unsure, send us your vessel make, model, and how you plan to use the platform (swimming, jet-ski docking, guest landing, etc.) and we'll recommend the right configuration — usually within 24 hours.

Each platform deflates and rolls into a compact storage bag that fits in a standard lazarette, cockpit locker, or garage. The smallest model (375) packs down to 155 × 30 × 30 cm, and even the largest 800 stores at 220 × 35 × 35 cm — comparable to a long fender bag or rolled-up bimini cover.

No permanent modifications are required. The platform attaches to your existing transom, swim ladder mounts, or stern cleats using marine-grade webbing straps and stainless-steel D-rings. This is one of the main reasons our customers choose an inflatable platform over a custom hydraulic extension — no shipyard time, no drilling, no warranty implications on your hull.

For superyacht installations involving multi-module configurations, our team will provide a custom rigging plan based on your stern geometry.

The platform is designed for use at anchor or in calm-to-moderate sea conditions (typically up to Beaufort 4 / wave heights below 1m). The high working pressure makes it remarkably stable — you can walk, lie, or jump on it without significant flex.

In rougher conditions, we recommend deflating and stowing the platform for safety. The bow tether system and load-rated D-rings ensure secure attachment to your vessel during normal anchor use.

Yes. We provide comprehensive OEM/ODM services, including:

• Custom logo printing (UV-resistant, won't peel)
• PMS color matching for deck and tube panels
• Custom dimensions and module configurations
• Private-label packaging for distributors and brands
• Velcro placement customization for charter fleet setups

Typical MOQ for custom orders starts at 10 pieces. Contact us with your specifications for a tailored quote.

Pricing depends on the platform size, configuration, and any OEM customization. As a guide, a single-module setup starts in the mid four-figure range (USD), while large multi-module superyacht configurations are priced on a per-project basis. This is typically 70–85% less than a comparable hydraulic platform extension.

We ship worldwide via sea freight (FCL/LCL) for wholesale orders and air freight or express courier for samples and small orders. EXW, FOB, CIF, and DDP terms are all available depending on your destination.

All HUALE platforms come with a 2-year manufacturer warranty covering material defects, seam integrity, and air retention. We also provide a free repair kit (patch material and adhesive) with every platform for minor field repairs.

For wholesale and OEM customers, we offer extended warranty terms, replacement parts inventory support, and direct factory technical assistance. Our customer success team is reachable via email, WhatsApp, and WeChat for any post-sale questions.